Handheld,RTD,Thermometers

Handheld RTD Thermometers













Platinum Handheld RTD Thermometers

  • Accurate to ±0.1% of reading or ±0.7°F (±0.4°C), which ever is greater.
  • Field calibration capabilities minimize probe error
  • Stores up to 99 readings
  • Features selectable temperature scale and resolution

Handheld RTD Thermometers from Barnant perform like an expensive benchtop unit. Microprocessor-based meter features keypad selectable measuring scale (°F or °C) and resolution (0.1 to 1°). Choose an alpha of 0.003850 a (DIN IEC 751) or 0.003916 a.


Handheld RTD Thermometers Dual LCD gives you two measurements at once: the four-digit upper display shows current reading while the five character alphanumeric lower display facilitates setup, calibration, or special functions. Nonvolatile memory stores factory and field calibration constants; currently selected resolution, scale and setup values; and up to 99 user-selected readings.

Handheld RTD Thermometers have many easy-to-use functions help you with your measuring applications: ALPHA displays your currently selected alpha (3850 or 3916); CAL lets you calibrate the probe manually or automatically to 32°F or 212°F (0°C to 100°C). HOLD "freezes" current reading in lower display; PEAK and VALLEY display single high and low points respectively.

Use DT to display the differential between present temperature and temperature at the time the key was pressed - dual display shows both readings. STORE allows you to send up to 99 readings to memory. RECALL displays average of stored readings; use the INC and DEC keys to sequentially display stored readings.

Handheld RTD Thermometers rugged ABS plastic housing protects meter against harmful chemicals and hard use. Features a built-in stand and a sealed keypad with a shatter-proof display window. Powered by one 9V battery (included). Meter accepts any 100W platinum RTD probe with the Barnant three-pin connector; order probes separately.

NOTE: NIST traceability is available when you order the RTD thermometer with our 100W platinum RTD probe. Inquire when placing your order.


Handheld RTD Thermometers Secifications:

Range: -330°F to 1560°F; -201 to 849°C (selectable)
Resolution: 0.1° or 1° (selectable) to 999.9°, 1° above 999.9°
Accuracy: ±0.1% of reading or ±0.7°F; ±0.4°C (whichever is greater)
Repeatability: ±0.2°F
Probe: one 100W platinum RTD (not included); three-pin connector
Display: dual LCD-upper is 4 digit, lower is 5 character alphanumeric
Operating ambient: 50 to 104°F (10 to 40°C) for stated accuracy
Power: one 9V battery (included)
Battery Life: 200 hours
Low-battery indication: yes
Output: none
Dimensions: 31/2"W x 61/2" H x 13/16" D
Shipping weight: 1 lb (0.5 kg)

ORDERING INFORMATION
600-9340 Barnant Platinum RTD Thermometer
9376-04 Replacement batteries (9V. Pack of 4)

Carrying Cases
8520-10 Clear window case with adjustable strap. Protects meter while in use.
600-2827 Cordura nylon carrying case. Holds one meter and one probe.

Adapters and Connectors
Use these adapters or this connector to make your RTD probes compatible with the three-pin connection on all the platinum RTD meters.
600-9350 Adapter; ANSI three-pin miniconnector to three-pin connector.
600-9352 Adapter; ANSI three-pin standard connector to three-pin connector.
2186-50 Connector. Converts 2 or 3 wire probe with stripped wire ends to three-pin connector.


Quality Temperature, Pressure and Recording Instrumentation